Accumulator – Fiat Ducato Comfort-Matic
The accumulator is responsible to store the pressure of the hydraulic system for later access by the actuators. The bladder type accumulator has two cells: one cell storing the hydraulic fluid and one cell containing a gas to create counterpressure. Both cells are separated by a membrane. These accumulators have a certain life span and a common defect is that the gas leaks out of the cell, which causes the system to be unable to build up hydraulic pressure. In many of such cases, the pump appears to prime permanently.
We offer the brand new original Magneti Marelli spare part.
Clutch Master Cylinder – Fiat Ducato Comfort-Matic
The clutch master cylinder is a hydraulic component of the clutch actuation system in the Comfort-Matic transmission. In case of a leak, the transmission may no longer properly engage and disengage the clutch. Possible symptoms include jerking during takeoff, sudden engagement of the clutch, clutch slippage, and even complete transmission failure. We sell a brand new, original Magneti Marelli part.
Clutch Sensor – Fiat Ducato Comfort-Matic
The clutch sensor (potentiometer) is responsible to detect the current state of the clutch engagement. This sensor is mounted on the clutch slave cylinder. A faulty sensor can prevent the car to open or close the clutch.
We sell an original spare part from Magneti Marelli.
Fluid Tank – Fiat Ducato Comfort-Matic
The fluid tank stores the hydraulic oil necessary for controlling the Fiat Ducato Comfort-Matic transmission. The set includes the fluid tank as well as the filler neck for the clutch system, which operates with DOT4. We sell a brand new, original Magneti Marelli part.
Gear Sensor – Fiat Ducato Comfort-Matic
The Fiat Ducato Comfort-Matic gear sensor is responsible to detect the current state of the gear engagement. A faulty sensor can prevent the car to shift.
We sell an original spare part from Magneti Marelli.
Pentosin CHF 11S
Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc.
It is suitable for all extreme conditions and guarantees full performance from -40 Degree Celsius to over 130 Degree Celsius system temperature.
Pentosin CHF 11S meets DIN 51 524T3 and ISO 7308 specification standards.
Pressure Sensor – Fiat Ducato Comfort-Matic
The pressure sensor is responsible to detect the hydraulic pressure in the accumulator of the Fiat Ducato Comfort-Matic system. This is an original and brandnew spare part.
Pump Motor – Fiat Ducato Comfort-Matic
The pump motor drives the gear pump, which generates the pressure for the Comfort-Matic transmission. Both parts together form the hydraulic pump. Without hydraulic pressure, the transmission cannot perform any action – neither change gears, nor operate the clutch. Therefore, the hydraulic pump is the most important component in the system.
In most cases, it is sufficient to replace only the electric motor, as this is a wearing part. The gear pump fails only very rarely. Another advantage is that when only the pump motor is changed, the hydraulic system does not need to be bled afterwards, unless it has been opened.
We sell an original, brand new Magneti Marelli spare part – the same part you would get from Fiat.
Pump Relay – Fiat Ducato Comfort-Matic
The electromagnetic relay is responsible to turn on / off the hydraulic pump of the Comfort-Matic system. A broken relay causes the pump to fail priming. Without hydraulic pressure, the system cannot engage the gears or clutch. This is an OE quality aftermarket part.
The product photo is for illustration purposes only; the delivered relay may look different.
Service Kit Hydraulic Pump – Fiat Ducato Comfort-Matic
The service kit includes the plastic coupling, which connects the shaft of the gear pump with the shaft of the electric motor, as well as seals.
Shift Actuator – Fiat Ducato Comfort-Matic
The shift actuator is responsible for the mechanical gear shifting process. It is controlled hydraulically by the solenoid valves and is one of the most important components in the Comfort-Matic system. We sell a brand new, original Magneti Marelli part.
Transmission Speed Sensor – Fiat Ducato Comfort-Matic
This sensor provides the speed signal of the transmission input shaft. The speed signal is required by the control unit to control the transmission system, adjusting properly the shaft speeds before engaging and disengaging the different gears.
Wiring Harness – Fiat Ducato Comfort-Matic
The wiring harness connects the transmission control unit and the rest of the vehicle’s electronics with the components of the Comfort-Matic system, including for example sensors and solenoid valves. We sell a brand-new and original Magneti Marelli spare part.